Swarm drone light show software download,
https://www.roppor.com
For more information on “ROPPOR Art Swarm Drone Light Show of 5 samples”, you can check out the video on the YouTube channel below.
5 samples for ROPPOR Art swarm drone performance [ENG Subtitle]
5 samples for ROPPOR Art swarm drone Light Show(1)
When you click this shape like when creating a sphere
There are many items, and among them, choose Cloner!
A Cloner is created on the right side, and the Sphere created above it is subordinated.
(You can drag and drop the sphere ^ ^~)
I only subordinated it, but the number of spheres that only existed has increased to 3.
(Cloner with default settings applied)
Let’s adjust the Cloner’s settings to adjust the number and placement of drones!
Change Cloner Mode to Grid Array.
Create a starting formation based on tiling as a basic principle. The reason for this is to make it easier to manage the operating drones at the start and end of operation.
Each cell of Count represents X, Y, X values. You can freely place as many units as the user has, right?
Note that you can’t give values on the Y axis! If you give it a value, it will be placed in the program because ,in reality, it cannot be placed in the ai.
Adjust the spacing between objects by adjusting the Size item. The default safety clearance is 300 cm!
300cm is the distance from the center of drone A to the center of drone B. As the appearance size of
the actual drone increases, the safety gap needs to increase even more.
Since I will be using 5 drones, I adjust the 3rd part of Count (Z value) to 5.
If you have a good sense, you can increase it to 10 or create it freely!